
5
Introduction
Chapter 1
Embedded and Industrial Computing
Chapter 1:
Introduction
Thank you for choosing the LVC-5770. The LVC-5770
is a fanless mobile NVR system which equips with a
suspension kit. It is designed to be installed on a moving
transportation system. In addition, the LVC-5770 is also
a Power sourcing equipment (PSE); the multiple PoE LAN
ports on the system can be used to connect to powered
device (PD) to supply power to the device through the
Ethernet cables.
The system encompasses a wide variety of communication
ports to facilitate every possible in-vehicle applications
including surveillance, event data recorder and the
GPS receiver. It also features an external HDD drive bay
for easy insertion of the HDD/SSD. The following list
highlights the capabilities of the LVC-5770 system.
One PoE power adapter which can accept vehicle •
power for 9~36 input voltage and supply 48VDC
output voltage for PoE power and 9~36 VDC output
for PC power and 9~36VDC for Aux power.
One Digital I/O port for 4 digital input and 3 output •
connections (via a DE-15 connector).
Two additional pins from the above Digital I/O can •
be used for system wake-up to power on the system
automatically.
PC audio ports with • line in, line out and microphone
ports.
Rich I/O ports: 2 RS-232/422/485 via D-Sub 9, 2 LAN •
ports, 6 USB ports (6 type A)
Dual Mini-PCIe connectors for 3G Internet services •
(with 1 SIM card readers for 3G wireless Internet
connections) and an additional PCIe expansion
suitable for Wi-Fi connection.
Dual video display: DVI-D+VGA or HDMI+VGA output •
with Intel HD Graphics 3000
Power ignition control mechanism with programmable •
on/off/delay switch
Wide range of DC power input from 9V to 36V, suitable •
for vehicular 12V or 24V battery with Ignition control.
–Power input current protection by the 10A fuse and
15KP30A TVS
--12V DC output current protection by the 1A Polyfuse
Battery voltage protection: Over Voltage Protection •
and Under Voltage Protection
Standby power consumption are well under 12V/81mA
and 24V/83mA
Extended operating temperature between -20 ~ 55 ºC •
(-4 ~ 131ºF)
System Specification
Dimensions (WxHxD)
276.4x190x85.3mm
(10.88”x7.48”x3.36”)
Processor Intel Sandy Bridge Processors
Chipset Intel HM65
System
Memory
Technology DDR3 SO-DIMMx2
Max. Capacity Up to 16GB
SATA
Removable 2.5” SSD/HDD drive
bayx2, on-board 8GB SSD
Ethernet Controller Intel 82574Lx2
Graphic Controller Intel integrated HD graphics engine
Audio Controller ALC886
IO
LAN GbE RJ45 x2
Display
DVI-D, maximum resolution up to
1920x1200@60Hz
VGA, maximum resolution up to
2048x1536@75Hz
HDMI, maximum resolution up to
1920x1200@60Hz
Dual display function supports inde-
pendent, clone and extended mode
(VGA+DVI or VGA+HDMI).
Audio
Mic-in and Line-out with 2 watt by
DB9 female connector
Serial I/O 2xRS-232/422/485 with RI/5V/12V
GPIO
4x DI 12V Level
3x DO 12V Level
2x DI (from MCU) 5V Level
GPS Ublox NEO-6Q GPS receiver module
G-sensor ADXL 345
USB 2.0 Type A x6
Power Input 3-pin terminal block (+, -, ignition)
Expansion
Mini-PCIe x2 (one with SIM card
reader)
Others
External: 3x SMA antenna hole,
reset, Remote Power switch
Internal: 9~36Vdc (max. 10A) On/
Off software controllable
Power Input
+9~36VDC input range, ATX mode
support ignition delay on/off
control
PoE Power Adapter LVP-POE936A included
OS Support
Linux Kernel 2.6.18 or later
Windows XPE/WES2009, XP Pro
FES, WS7E, Win 7 Pro FES
Certications CE, FCC Class A, E13, RoHS
Comentários a estes Manuais