Lanner LVC-5770 Manual do Utilizador descarregar pdf (Página 26)

Board Layout

Chapter 3

Embedded and Industrial Computing

Enable or Disable Daughter Board LEK-IG1 (COMSLT2):

This jumper is for enabling or disabling COM5/COM6 of

daughter board LEK-IG1. If this jumper is set to disable,

the ISM will not work (refer to Appendix A Using the Ignition

System Manager (ISM)).

Dual USB 2.0 Port Connector #0 and #1 (USB1)

Dual USB 2.0 Port Connector #2 and #3 (USB2)

Dual USB 2.0 Port Connector #4 and #5 (USB3)

Clear CMOS jumper (CMOS1/CMOS2): It is for clearing

the CMOS data. CMOS1clears CMOS data with real-time

clock (RTC) whereas CMOS2 clears CMOS data only.

To erase the CMOS data:

Turn off the computer and unplug the power cord.

Move the jumper cap from pins 1-2 (default) to pins 1.

2-3. Keep the cap on pins 2-3 for about 5-10 seconds,

then move the cap back to pins 1-2.

Plug the power cord and turn on the computer.2.

Enter BIOS setup to re-enter data.3.

PS/2 Keyboard and Mouse Connector (KBM1)

Ignition Connector on Board (ignition1): Power

ignition connector.

Pin No. Pin Name

1-2 Disable

2-3 Enable

1 2 3 4

5 6 7 8

Pin No. Pin Name

1 VCCUSB

2 USB0N

3 USB0P

4 GND

5 VCCUSB1

6 USB1N

7 USB1P

8 GND

Pin No. Pin Name

1-2 Normal (Default)

2-3 Clear CMOS and RTC (CMOS1)

Clear CMOS only (CMOS2)

Pin No. Pin Name

1 VCC

3 MDATA

5 KDATA

7 GND

Pin No. Pin Name

2 MCLK

4 NC

6 NC

8 KCLK

Pin No. Pin Name Pin No. Pin Name

1 DCIN_VCC 6 DC2DC_PWROK

2 DC_VIN 7 COM5_SIN

3 GND 8 SOUT

4 SYS_PWROK 9 PWR_BTN_IGN

5 DC2DC_EN 10 IGNITION

1 2 3 4 10

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 48 49

Comentários a estes Manuais

Sem comentários

Lanner LVC-5770 Manual do Utilizador Página 26

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Lanner LVC-5770