Lanner LEC-7100 Manual do Utilizador descarregar pdf (Página 19)

Bios Settings

Chapter 4

Embedded and Industrial Computing

Primary and Secondary IDE Master and Slave Settings

From the IDE Configuration screen, press <Enter> to

access the sub menu for the primary and secondary IDE

master and slave drives. Use this screen to select options

for the Primary and Secondary IDE drives. Use the up and

down <Arrow> keys to select an item. Use the <Plus> and

<Minus> keys to change the value of the selected option.

The settings are described on the following pages. The

screen for the Primary IDE Master is shown at the right.

Type

This option sets the type of device that the AMIBIOS

attempts to boot from after the Power-On Self-Test (POST)

has completed. The Load Optimal default setting is Auto.

Option Description

Not Installed Set this value to prevent the BIOS from

searching for an IDE disk drive on the specified

channel.

Auto Set this value to allow the BIOS auto detect the

IDE disk drive type attached to the specified

channel. This setting should be used if an IDE

hard disk drive is attached to the specified

channel. This is the default setting.

CDROM This option specifies that an IDE CD-ROM drive

is attached to the specified IDE channel. The

BIOS will not attempt to search for other types

of IDE disk drives on the specified channe.

ARMD This option specifies an ATAPI Removable

Media Device.

This includes, but is not limited to:

• ZIP

• LS-120

LBA/Large Mode

LBA (Logical Block Addressing) is a method of addressing

data on a disk drive. In LBA mode, the maximum drive

capacity is 137 GB. The Load Optimal default setting is

Auto.

Option Description

Disabled Set this value to prevent the BIOS from using

Large Block Addressing mode control on the

specified channel.

Auto Set this value to allow the BIOS to auto detect

the Large Block Addressing mode control on the

specified channel. This is the default setting.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 37 38

Comentários a estes Manuais

Sem comentários

Lanner LEC-7100 Manual do Utilizador Página 19

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Lanner LEC-7100